surface resistance
英 [ˈsɜːfɪs rɪˈzɪstəns]
美 [ˈsɜːrfɪs rɪˈzɪstəns]
网络 表面阻抗; 表面电阻; 表面电阻率; 表面阻力; 外貌电阻
双语例句
- Surface resistance measurement method and error analysis for HTS thin films
超导薄膜表面电阻测试方法及误差分析 - Discussing the Calibration Method of the Light-emitting Diode-based Surface Resistance Tester
浅谈发光二极管型表面电阻测试仪校准方法 - In contrast to segmented PSDs, Lateral-Effect PSDs are composed of a single active element in which the photodiode surface resistance is used to determine position.
与分段灵敏探测器相比，侧向效应灵敏探测器是由一个单一的活性元素构成，其中使用光电二极管的表面电阻来判断的位置。 - Many plastics have high surface resistance and low electrical conductivity.
很多塑料具有高的表面电阻和低的导电性能。 - Improvement of Image Method for Measuring the Microwave Surface Resistance of HTS Thin Film
镜像法高温超导薄膜表面电阻测试装置的改进 - The volume resistance and surface resistance measured by three electrodes and the resistance between two electrodes ( R) of carbon fiber reinforced cement ( CFRC) were studied.
研究四电极法中电板位置、电流大小、交直流等对碳纤维水泥基复合材料（CFRC）圆柱试样电阻率测试的影响。 - Nondestructive measurement of microwave surface resistance of HTS at multifrequency
高温超导薄膜微波表面电阻多频点无损测试 - The relationship between surface resistance and conductive fillers content in hybrid type powder coatings for three different types conductive fillers was studied.
研究了使用三类不同导电填料制得的粉末涂料的表面电阻与导电填料含量的关系，确定了粉末涂料中各类导电填料的渗滤阈值。 - Form Mechanism and Effect Element of Electroless Plating Fabric ′ s Surface Resistance
化学镀电磁辐射防护织物表面电阻的形成机理和影响因素的探讨 - Soil surface resistance models to evaporation and field measurements
土壤表面蒸发阻力模型与田间测定方法 - The antistatic properties of different antistatic agents and their effect factors were studied by measuring the surface resistance and the bulk specific resistance of PP sample.
通过高阻计测试试样的表面电阻和体积电阻，探讨不同抗静电剂的抗静电效果及其影响因素。 - The influence of ATO amount, binder resin, solvent, ball grinding time, and adhesion promotor on the surface resistance and transparency of the film are discussed. The optimum technology parameters are listed.
讨论了ATO含量、基料树脂、溶剂、研磨时间和附着力促进剂对涂层的表面电阻和透明度的影响，确定了最佳的工艺参数。 - This paper introduces the method of insulation pollution testing, including surface resistance device and Vent current testing device, with correct results.
本文介绍了绝缘子污染的测量方法，表面电阻测量装置和泄漏电流检测装置，并取得一些结果。 - An analysis of the influence of selecting s parameters upon the surface resistance of superconducting thin film
散射参数的选择对高温超导薄膜表面阻抗影响的分析 - The relations between soil surface resistance and evaporating time, and difference of vapour pressure between evaporating plane and atmosphere were simulated. Simulating result of the latter was better than that of the former.
同时，还对土壤表面阻力与蒸发时间的关系、与蒸发时间及土壤蒸发面和大气间水汽压差的关系进行了模拟，结果后一种比前一种模拟更符合实际。 - An intensive research on the dielectric resonator method appropriate to measure microwave surface resistance of high temperature superconducting ( HTS) films was carried out, and a new experimental method i.e. double frequency method and a system loss formula were presented.
本文对介质谐振器法测量高温超导薄膜微波表面电阻的方法进行了详细的研究，并提出了新的计算方法。 - The microwave surface resistance ( Rs) is an important parameter of measuring the quality of HTS film.
高温超导薄膜的微波表面电阻是衡量薄膜质量的一个重要参数指标。 - The thickness of coating and surface resistance were checked, and the ratio of making shell was properly selected.
并对涂料的涂层厚度和表面电阻进行检测，筛选出适于制壳的配比； - Based on this, the influences of different amount of flame retardant on properties, including tensile strength, impact strength, oxygen index, surface resistance, smoke density grade of material were studied, too.
以此为基础，考察了阻燃剂不同用量对材料的拉伸强度、冲击强度、氧指数、表面电阻率、烟密度等级等性能的影响，比较了阻燃剂不同用量时材料的综合性能。 - The surface resistance of HDPE blended with solid and liquid antistatic agents and that of HDPE blended with only solid or liquid antistatic agent were analysed.
分析了固态和液态抗静电剂在HDPE中混合使用与单组分抗静电剂在HDPE中使用的表面电阻率变化情况； - The measurement of the surface resistance of high t_c superconducting thin film
高Tc超导薄膜微波表面电阻的测量 - Hardness is an important mechanical properties of materials, which indicated that surface resistance to local plastic deformation and destruction capabilities.
硬度是材料的重要力学性能指标之一，它表示材料表面抵抗局部塑性变形和破坏的能力。 - It is helpful to understand the mechanism of surface resistance to protein adsorption in experimentally synthesizing anti-fouling materials.
理解表面阻抗蛋白质吸附机理将对实验中合成抗吸附材料非常有益。 - Laser cladding technology have an important prospect in power plant surface resistance of abrasion and corrosion.
激光熔覆技术在火电厂耐磨耐蚀表面防护工程中具有重要的应用前景。 - But the Pt-modifying opposite electrode prepared by various methods performed great differences, the Pt-modifying opposite electrode prepared by electrodeposition method was with a orderly surface structure, low surface resistance, low concentration of impurities and defects, and high catalysis ability.
但是不同方法制各的铂金电极性能有较大差别，采用电镀法制备的对电极具有规整表面结构，小的表面电阻以及少的杂质和缺陷含量，具有很高的催化活性。 - Prepared by molten salt immersion resistance of the highest insulating film, the surface composition of α-Al2O3 content of up to; anodic oxidation method followed by the insulation film resistors; insulating film which prepared by direct oxidation is the lowest surface resistance.
液浸熔盐法制备的绝缘膜电阻最高，其表面成分中α-Al2O3含量也最多；阳极氧化法制备的绝缘膜电阻次之；直接氧化法制备的绝缘膜表面电阻最低。 - After the calibration process of this multimode measuring method, the frequency characteristic of surface resistance for testing sample can be described within one temperature cycle.
在校准步骤完成后，该多模测试方法可在一个温度循环内，对被测样品的微波表面电阻频率特性进行表征。 - Extra accepter energy level and surface electrons losing contributed to the surface resistance rising after NO2 adsorption.
受主能级的产生和电子的流失导致了吸附后表面电阻增加。